Remote Control Server ---> Client Control

[bulentkusva]

Can you help in solving it?

192.168.1.100 remote kontrol ---> enable server
192.168.1.101 remote kontrol ---> enable client --- INP1D ---> OUT0
-----------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.101 = INP1D ----> HIGH => 192.168.1.100 OUT0 =OFF

OK NO PROBLEM
-----------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.101 INP1D ----> LOW |POWER OFF |
INP1D ----> HIGH ----> |POWER ON | 192.168.1.100 OUT0 =OFF

OK NO PROBLEM
---------------------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.100 |POWER OFF |
|POWER ON | 192.168.1.100 OUT0 =OFF (192.168.1.101 => INP1D ----> LOW)

PROBLEM

[wilkxt]

tou use LK 1.2 HW or new module LK2? We solve problem in next soft upgrade

[bulentkusva]

new module LK2 I can use, not a problem
Thank You

[bulentkusva]

To work settings, how should we do?
which version works?
(hardware,software)

[wilkxt]

we don't have new soft

[bulentkusva]

urgently needed for a client
using a dry control system
and is having problems
If possible, could you solve?

[wilkxt]

ok, 2-3 days

[bulentkusva]

The new version has been published
Did this error is resolved?
If resolved, what settings should we do?
Thank you for your interest

[wilkxt]

I jus write path, the problem is when serwer is power off and next you power on serwer and serwer don't check INPD state in client?

[bulentkusva]

192.168.1.100 remote kontrol ---> enable server
192.168.1.101 remote kontrol ---> enable client --- INP1D ---> OUT0

---------------------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.100 |POWER OFF or POWER RESET|
|POWER ON | 192.168.1.100 OUT0 =OFF (192.168.1.101 => INP1D ----> LOW)