+- Forum Tiny Control Solution (https://forum.tinycontrol.pl)
+-- Dział: LanKontroler - sprzęt i wersje wsadów, problemy, zastosowanie (https://forum.tinycontrol.pl/forumdisplay.php?fid=3)
+--- Dział: LanKontroler - wersje oprogramowania (https://forum.tinycontrol.pl/forumdisplay.php?fid=4)
+--- Wątek: Remote Control Server ---> Client Control (/showthread.php?tid=431)
Strony:
1
2
Remote Control Server ---> Client Control - bulentkusva - 04-28-2014
Can you help in solving it?
192.168.1.100 remote kontrol ---> enable server
192.168.1.101 remote kontrol ---> enable client --- INP1D ---> OUT0
-----------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.101 = INP1D ----> HIGH => 192.168.1.100 OUT0 =OFF
OK NO PROBLEM
-----------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.101 INP1D ----> LOW |POWER OFF |
INP1D ----> HIGH ----> |POWER ON | 192.168.1.100 OUT0 =OFF
OK NO PROBLEM
---------------------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.100 |POWER OFF |
|POWER ON | 192.168.1.100 OUT0 =OFF (192.168.1.101 => INP1D ----> LOW)
PROBLEM
Re: Remote Control Server ---> Client Control - wilkxt - 05-01-2014
tou use LK 1.2 HW or new module LK2? We solve problem in next soft upgrade
Re: Remote Control Server ---> Client Control - bulentkusva - 05-09-2014
new module LK2 I can use, not a problem
Thank You
Re: Remote Control Server ---> Client Control - bulentkusva - 06-03-2014
To work settings, how should we do?
which version works?
(hardware,software)
Re: Remote Control Server ---> Client Control - wilkxt - 06-05-2014
we don't have new soft
Re: Remote Control Server ---> Client Control - bulentkusva - 06-17-2014
urgently needed for a client
using a dry control system
and is having problems
If possible, could you solve?
Re: Remote Control Server ---> Client Control - wilkxt - 06-17-2014
ok, 2-3 days
Re: Remote Control Server ---> Client Control - bulentkusva - 06-30-2014
The new version has been published
Did this error is resolved?
If resolved, what settings should we do?
Thank you for your interest
Re: Remote Control Server ---> Client Control - wilkxt - 07-04-2014
I jus write path, the problem is when serwer is power off and next you power on serwer and serwer don't check INPD state in client?
Re: Remote Control Server ---> Client Control - bulentkusva - 07-08-2014
192.168.1.100 remote kontrol ---> enable server
192.168.1.101 remote kontrol ---> enable client --- INP1D ---> OUT0
---------------------------
192.168.1.101 = INP1D ----> LOW => 192.168.1.100 OUT0 =ON
192.168.1.100 |POWER OFF or POWER RESET|
|POWER ON | 192.168.1.100 OUT0 =OFF (192.168.1.101 => INP1D ----> LOW)