Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Activate The Outputs PWM in LK3
#1
Hi .
It would be possible after start of LK3 do not to activate the outputs PWM in LK3 ...?????

George.
Odpowiedz
#2
What do you mean by not activating?
After start PWM outs are not active.
pozdrawiam
tomek
Odpowiedz
#3
wilkxt post_id=16016 time=1556312555 user_id=61 napisał(a):What do you mean by not activating?
After start PWM outs are not active.

Unfortunately to me at every start is active .
I am using Version: 1.51b1 in LK3 and https://www.ledats.pl/en/kontrolazasilan...results=79
I may have some wrong regulation ..
[Obrazek: LANKON-088.jpg]
I have something wrong ? :?:

George.
Odpowiedz
#4
Please any help ???
and any help for Reset time in PWM ????

George.
Odpowiedz
#5
First questins is how you use PMW out, as normal OUT (on/off) or as PWM out?
You have sets PWM as normal outs.
pozdrawiam
tomek
Odpowiedz
#6
wilkxt post_id=16020 time=1557176133 user_id=61 napisał(a):First questins is how you use PMW out, as normal OUT (on/off) or as PWM out?
You have sets PWM as normal outs.

Hi thanks for the ansering .
I use PMW as normal OUT (on/off) .
Cytat:You have sets PWM as normal outs
I do not understand that .
I have put a little more over a photo with my set-up ...
for the PMW I have not made any other arrangements .

George.
Odpowiedz
#7
For you state active is low or high?
pozdrawiam
tomek
Odpowiedz
#8
when you start LK3, you want to PWM out low or high?
pozdrawiam
tomek
Odpowiedz
#9
wilkxt post_id=16028 time=1557768828 user_id=61 napisał(a):when you start LK3, you want to PWM out low or high?

Sorry to be late to answer .
I want to PWM out low .
Odpowiedz


Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości