+- Forum Tiny Control Solution (https://forum.tinycontrol.pl)
+-- Dział: LanKontroler - sprzęt i wersje wsadów, problemy, zastosowanie (https://forum.tinycontrol.pl/forumdisplay.php?fid=3)
+--- Dział: LanKontroler - wersje oprogramowania (https://forum.tinycontrol.pl/forumdisplay.php?fid=4)
+---- Dział: Przykłady zastosowań przez użytkowników. (https://forum.tinycontrol.pl/forumdisplay.php?fid=6)
+---- Wątek: Event Config (/showthread.php?tid=442)
Event Config - lnc - 05-21-2014
Hi, hope you can help.
I have been trying to figure out how the event rules work but it has all ended in fail.
I would like to use the LK to turn off a relay (OUT0) if the voltage of INP3 is more than 14.5v but also if its less than 11.5v.
I have this working to turn off at 11.5v but when voltage returns above 11.5v it does not set the relay back, how can I get this to work please?
Also I would like to use an additional (add on board) relay (OUT1) to turn a fan on above 40c (temp) but then turn off once temp is below 40c.
Re: Event Config - wilkxt - 05-28-2014
look for this example
event.jpg (Rozmiar: 13.72 KB / Pobrań: 1,732)